TYPICAL PROPERTIES
Two-side Sealable, One-side Treated, Co-Extruded OPP Film FDA Compliant for Direct Food Contact
Advantages
Wide heat seal range on both sides provide:
-
Higher packaging speeds
-
Opportunity to lower sealing temperatures, extending machine life
-
Excellent odor and moisture barrier
-
Stable COF
Typical Applications
-
Printable film designed for use in both Horizontal and Vertical form, fill and seal equipment
-
Horizontal and Vertical packaging, in laminated or single web form
-
End-fold over-wrap, utilizing the wide seal range and good hot COF both faces Used for lap or fin seal
Primary Markets
-
Snacks
-
Sandwich overwrap Frozen foods Baked goods Confectionery
-
Box overwrap
Important Features
-
Excellent hot tack for vertical packages Good moisture and odor barrier for product protection
-
High transparency and gloss provide shelf appeal
-
Suitable for reverse cold seal coating with surface printed inks and release lacquer UV ink systems and adhesives are not recommended
BOPP FILM EXAMPLES
TECHNICAL DATA SHEET
Thickness & Yield may vary +/- 5%
All property values are developed according to ASTM.
Treatment & Winding
One surface is treated for printing and/or laminating. This treated surface is wound to the outside of the roll.
Printing
U.V. ink systems and adhesives are not recommended.
Lamination
Film is suitable for solvent-based or solventless laminations
​
Storage & Handling
HSF Films should be placed in the processing area 24 hours prior to processing to acclimatize. Even though these films are largely unaffected by climatic conditions, they should not be stored at temperatures above 104°F. Under suitable storage conditions, the film can be stored for a period of six months without any risk of deterioration.
The information herein, is to the best of our knowledge, true, and accurate. However, since conditions of use are beyond our control, all recommendations or suggestions are presented without guarantee or responsibility on our part.
WANT TO PERSONALIZE FILM?
REQUEST DESIGN QUOTE BELOW